+8615824109616
  • tto-4
  • linkedin
  • facebook
  • youtube

30% Off! On sale! High quality electric bikes in LAS VEGAS Warehouse!

page_banner

news

1. Correct cadence

The fewer times the battery is charged and discharged, the longer the battery will last. Every time you ride an electric bicycle,https://www.tikiebike.com/mountain-bike/ you need to find the best rhythm with the electric assist motor during pedaling. This is a very smart choice. Generally speaking, the motor of an electric bicycle is the most efficient to assist in the normal to high cadence rhythm, which also means that the power loss is the least.

motor

2. Do not empty the battery completely

The battery or motor itself actually has a computer chip to regulate the output and charge, protecting the battery’s health. This means that the battery can never be overcharged and discharged to damage itself. However, a full charge before each ride and a complete drain on the road will put a greater load on the battery. Such a charge and discharge is a battery cycle, so try to stop using the motor before the battery is completely drained, but easier said than done.

3. Charge

It is very important to charge the battery at room temperature, the ideal charging temperature is between 10-20 degrees Celsius, try not to be lower than 0 degrees Celsius, and do not charge in a humid environment.

lithium battery

4. Storage

If you are not going to ride your electric moped for a few days, weeks or months, then don’t let the battery completely empty, it is recommended to keep 30-60% of the power often, charge it every 6 months, and of course ride again be fully charged before.

Avoid using too much water around the motor and battery, it may cause seepage, short circuit.

5. Cleaning and Maintenance

The battery should be removed before cleaning the electric bike,or left in place to protect exposed sockets. It is recommended that you stay away from the high-pressure water gun and use a sponge to wipe it clean.

We think the best thing to do is to lightly wash it with a sponge in the upright position and let it dry completely before opening the motor compartment cover.


Post time: Nov-09-2022